Archive for the ‘Hackable Toys’ Category
Thursday, November 12th, 2009 |
The Hacker Style Brushless(20-22L) motor finds a very common use in Quadcopters. Unfortunately the only way to mount the motor on a frame is to reverse the shaft so that the mounting holes can be used for what they were meant for..mounting.
dontenorio69 has a very helpful video on how to do this. The same process is detailed below, but with pictures:
Saturday, March 7th, 2009 |
With all the nice hacks on digital picture frames scattered around the web, I decided to put them all in one place for reference. Due thanks to all the hackers out there who put their work out for everyone to see. It’s the joy in reverse engineering. For some of the hacks I’ve included a compressed file with the code and webpage archived in case the original site goes down. If you are the author an would not like it, please let me know.
PHILIPS Picture Frames
[v]incent was able to display his images directly to the frame by writing a little script which prepends a binary header to the JPEG file. There is a detailed writeup on how he reverse engineered the picture frame format.
Detailed info:
CEIVA Picture Frames
The CEIVA runs on a Cirrus Logic Maverick(EP7212) controller. It’s based on a ARM720T core with 2Mb Flash and 4Mb DRAM.
Initial hack done by [c]olin. The frame runs on Linux. Necessary patches and images are provided. [b]rad keeps a worklog here
New code can be loaded via a serial port on the PCB through a simple level converter.
Detailed info:
KeyChain Displays
[j]eroen from Spritesmods maintains a wiki of compatible keychain displays with his firmware hack. He and a couple of guys regularly update it with new displays. Most of the displays use the SITRONIX ST2205U controller in them. I tried my hand in doing the same with the Hannah Montana Vu-Me photo frame. I got close, but bricked it in the end.
Their code is maintained at Google code
Detailed info:
- Models:
- TomTec
- Coby DP-151SX/DPKEY
- HK unbranded
- Keypix
- Dealxtreme SKU5218
- Innovage
- Dig-291
- Innovalley
- Webpage
- Wiki
- Google code
DIGITAL SPECTRUM MemoryFrame
The MemoryFrames run on WindowsCE5. [r]etoor from mozy.org managed to crash the frame using a keyboard, mouse and following a sequence. The frame runs on an ARM920T – a 32bit Arm9 processor. The following is an excerpt from his “YouTube’s more info…” link:
…”Basically you need both the mouse and keyboard plugged in, scroll down past the “Settings” option, scroll back up, and click the word “Settings” with your mouse. There is no enter key on the keyboard so you have to click the mouse….”
Detailed info:
SAMSUNG SPF-83v Frames
The frame parses feeds and regular html pages for images and displays them. You can use the frame’s i-net-functions to serve it data.
[t]obe from Infolexikon uses PHP to gather data and writes it all to an image using gd. These images are then pushed to the frame at regular intervals.
Detailed info:
JUICEBOX Digital Frames
[j]oevennix managed to rip out the LCD from a Juicebox and enclose it in his own custom frame. He didn’t have the mp3 kit at that time( although you can get it online), so he soldered a SD card slot into the cartridge connector. His webpage is down. The following is an archive of his work.
Detailed info:
If you find this interesting or have some new ideas or links on frames, please post in the comments. Don’t forget to Subscribe [email]for more followups and hacks. To get updates on this page, subscribe to the comments below.
Posted in Hackable Toys, Tutorials, hacks | 11 Comments »
Saturday, February 14th, 2009 |
As promised, after taking apart the ATV-360 Spy Video here, this is a follow-up on taking apart the Head Mounted Display[HUD]. The HUD has some very interesting DIY parts and ideas which you can try out. Maybe a cool wearable. The details on all the parts used are at the end of the post and comments are open for discussion.
The HUD consists of a frame which sits in the same way as you would wear a pair of spectacles. On the right side, a case is attached which holds all the necessary electronics and optics. The HUD receives video signals from the remote which houses the camera receiver.
1. First for a few views. Click on the views for a larger image.
2. So that you know how it looks, I setup two scenes. One with a PostIt note saying “HI” and the other a Rubik’s cube. The LCD is monocohrome however, so the image you will see is not color.
- The one with the PostIt note
- The one with the Rubiks cube
3. Opening is not that easy as there are no screws to take apart the top cover which says “Spy Gear”. The cover is glued to the case using glue. Taking a clue from Jake to avoid inserting the screwdriver on the side the “cable does not come out”, I managed to take it apart. Pry the side where the black cable comes out. The other side has the LCD connector, you might damage it if ou pry that side. It’s tough at first, but once you get one side, it gets easier.
4. Once the cover is removed, the PCB becomes visible. The main controller chip is a Kopin KCD-A300-QB. All the other parts are support components for the chip. There is a small potentiometer in one corner which allows you to change camera gain. You can see the display change in brightness when you change it. Try adjusting it, there is no harm in doing so as it can easily be bough back to it’s previous value by looking at the screen.
5. Remove the two screws keeping the PCB in place. Also it’s time to remove the LCD connector. To remove it, pull the black tab out a bit as in the pic.
The connector will slip out easily with a slight tug. The connector is pretty rugged. I have already plugged it in/out a few times.
6.The LCD connector is glued on to the casing. Remember to break it free before going ahead.
6: Four more screws need to be taken out to remove the eyepiece. Use a pair of pliers to do this.
7.Before I forget, the PCB has a high output smd LED behind it as below:
8. Prying out gives you the lens casing. It’s pretty well made, with the LCD nicely sitting in it’s place. It was designed so that the lens was at a fixed distance from the LCD.
9.Going further, pry the top half with a flat head screwdriver. There are four tiny rods which keep it inline. This part should come out easily.
9.Now for the LCD. The LCD is in a tiny casing which sits in a grooved box. There is a slight amount of glue on one end as in the image. With a flat head screwdriver, as shown, just give a tiny nudge and it should come free.
10. The LCD in all it’s glory!
11. The following views show the three pieces of the lens casing. Note that the part at the extreme right of each image has a diffused screen to spread light from the SMD LED.
12. This was as far as I could go. The eyepiece is glued together. Trying to take it apart would mean risk in breaking the lens.
Parts and Notes:
Main controller chip :: Kopin KCD-A300-QB
Documents :: kopin_kcd-a300-qb_dsiplay_driver
Notes :: This is the driver chip for the 300M LV monochrome display. It is designed to accept a standard monochrome video signal (525 or 625 lines), and convert it for the display. Unfortunately its a monochrome driver and not a color one.
LCD Display :: Kopin 300MLV CyberDisplay
Documents :: kopin_cyberdisplay_300m_lv_feature_sheet
Notes :: This is the LCD Display with the connector. The feature sheet shows a frameless one, but I’m unable to find the document with the framed one.
If you find this interesting or have some new ideas or links, please post it in the comments. Thanks for reading and don’t forget to Subscribe [email] for more followups and hacks.
Posted in Hackable Toys, Tutorials, hacks | 16 Comments »
Tuesday, February 10th, 2009 |
Things with LCDs are very interesting. I found a Hannah Montana Digital Photocube on sale and decided to look what’s inside it. Good for a day of hacking :)
First a description:
- Storage capacity: 8 M bit (Up to 70 photos) Resolution: 128×128 dpi
- Display: 1.5-inch color LCD
- Supported File Format: JPG (JPEG),BMP, GIF, PNG, & TIF
- Power: 2 xAAA batteries (not included)
- USB Ports: Mini-USB 1.1 interface
Searching around the net produced a lot of work done by Sprite. He and a couple of guys maintain a wiki containg information about hacked lcd keychains. Most of the keychains that have been hacked contain a ST2205U Microcontroller. With this information I proceeded ripping apart my photocube. This was what was inside:
A 1Mb A29L800( datasheet ) flash chip and a micrcontroller hidden behind a big black blob along with the LCD, buttons, USB port and an on-off switch. With some reading on Sprite’s blog and modifyng his script a little, I was able to verify that the microcontroller was indeed a ST2205U. If you browse through main.c, a function is_photoframe checks if the controller is a ST2205U. So I inserted a printf(“Response : %s\n”,buff) to verify if the chip gave back the correct string, which it did.
/*
Checks if the device is a photo frame by reading the first 512 bytes and
comparing against the known string that's there
*/
int is_photoframe(int f) {
int y,res;
char id[]="SITRONIX CORP.";
char *buff;
buff=malloc_aligned(0x200);
lseek(f,0x0,SEEK_SET);
y=read(f,buff,0x200);
buff[15]=0;
printf("Response : %s\n",buff);
// fprintf(stderr,"ID=%s\n",buff);
res=strcmp(buff,id)==0?1:0;
free_aligned(buff,0x200);
return res;
}
I’ll try documenting my steps going further. It’s in Linux( RedHat ) since I work on it, and you could do the same using a linux live cd.
1. Unpack Sprite’s hack from here. You will need to install libgd if you don’t have it. As root install gd-devel. Please read the README file in the unpacked directory. It’s written for a reason.
yum install gd-devel
2. Then as a user type “make” in the unpacked directory. This will compile the hack to give you the “phack” binary.
3. Now connect the photocube and turn it on. You will see “USB Connect” displayed on the screen. Open a terminal on your linux machine and type
dmesg | tail
This will give you any hardware information that occurred last. You will see the following:
If you see something like:
4096 512-byte hdwr sectors (2 MB)
then your close. Also note where your cube is mounted so you can access it. If you look at the pic above it says “Attached scsi removable disk sdg”, which means that the cube is mounted at /dev/sdg
4. Now to hack the firmware.
WARNING : Anything you do after this is at your own risk.
Type the following as root in your terminal, using the mount point which you got from step 3.
./hackfw.sh /dev/sdg
You will see the following as checks are made and eventually an error:
Sprite’s script makes a backup of the firmware and an image of the memory. It however says that “The hack won’t work for my Firmware.” When I looked into the script, it looks if my cube’s firmware is same as Sprite’s when he hacked his keychain, which is an entirely different product.
dd if=fwimage.bin bs=256 skip=58 count=2 of=fwbit 2>/dev/null
#check for all FFs Md5sum may not be _the_ tool for that, but it works OK.
if ! md5sum fwbit | grep -q de03fe65a6765caa8c91343acc62cffc; then
echo "No room at the location we want to place the hack!"
echo "This specific hack won't work for this particular firmware, I'm sorry."
exit 1;
fi
I did not have anything to loose, so I commented it out to bypass the check. Just put a “#” to comment out code.
5. I ran the script again (run as root), this time it went through the whole flashing process, till I rebooted
6. The script ends with “No Photoframe found here”. Turn off, Disconnect, Turn On and the Connect the photoframe. Get the mount point as in step 3. Type the following as root.
You should see the following on the LCD
The script allows a maximum of 10 characters. Another example
I was however unsuccessful in getting PNGs or JPEGs uploaded to the device. That’s when I bricked my cube trying different memory addresses. It doesn’t even turn on now. I’ll update when I get my hands on another one. If you have any questions or comments, you could enter them below. Thanks for reading and don’t forget to Subscribe for more followups and hacks.
Posted in Hackable Toys, Tutorials, hacks | 9 Comments »
Sunday, February 1st, 2009 |
I finally took apart the Spy Video which I got for a very good deal. I wanted to see if it would serve as a good platform for a robot and if the drive system could be upgraded. The most difficult part was taking apart the wheel hubs. The interesting part in the hubs design is that a better motor can be attached to it. The following sequence shows me taking the vehicle apart. Might come in handy for hardware hackers out there.
1. Various views of the vehicle.
2. Remove all the screws from the bottom of the vehicle, including the tracks.
3.Remove the top shell slowly. Don’t pull on it. You will need to disconnect the camera, antenna and mic headers to get it free.
4. Once the top shell is free, the circuit board and the drive system is visible. There is a bank of FETs for the motors. The board is very well labeled.
5. To take apart the drive system, loosen the screws around the orange box. Then unscrew the black tab keeping the wires from the orange box secure.
6.Taking apart the wheel hub is a chore, but possible with pliers, a small glass jar, some flame and some strength.First, remove the stopper from the shaft. Use pliers and strength:
Remove the large gear and everything between the gear and the stopper. Now again using pliers, remove the torque check gear:
Remove all the stuff after that including the orange cap with the three screws. Once the orange cap is removed, the black cover on the other end of the wheel can be removed:
Now for the interesting part. The wheel hub is dead set into the shaft and we need to remove it. Make sure you have a small jar, like below, ready. Choose one such that it’s mouth is small enough only for the shaft to go in. Ignore the gears on the shaft in the picture. You should be having just a blank shaft with the black hub and orange cap on.
Make sure you have the orange cap on. Now heat the shaft with a flame for around 30 seconds. This is just to soften the hub’s hold on the shaft. Holding it over the flame too long is going to melt the plastic.
Now while the shaft is still hot, place the shaft as shown below and hammer the other end down.
The shaft should come out after a few bangs. The wheel is now disassembled:
7. Why all this? I can now use a hub adapter and attach the ATV’s stock hub to a better motor.
The following hub adapter is from Lynxmotion. I will need to drill new holes to match the adapter.
If you are interested, check out your local Target store or you could try Amazon:
Thanks for looking. Any questions, ask in the comments.
Posted in Hackable Toys, Robots, Tutorials, hacks | 4 Comments »
Sunday, February 1st, 2009 |
Just got my spy video ATV-360 from Spy Gear. My local Target had this on sale for $28 and it was too good to resist. So much so that I bough two of them – with one as a standby for parts.
The ATV comes with the following features:
- -A skid steer design for easy maneuverability.
- -A wireless monochrome camera.
- -A wireless controller with a nice 360 degree turn feature.
- -A headset which receives a real time video feed from the vehicle as well as audio.
The build quality of the tracks is very good and looks like they can take a beating before they start wearing out. I haven’t checked range yet since I’m going to rip out the internals anyway.
The toy is a good filler for your electronics parts bin. Of special interest is the ATV’s head unit. It comes with a very hackable circuit board. Jake from JackOfAllTrades posted a detailed writeup on the board.
I’ll post when I’m done tearing it apart :).
If you are interested, check out your local Target store or you could try Amazon:
Posted in Hackable Toys, Robots | 3 Comments »
