|
Subversion, Apache and TortoiseSVN Install on Windows |
|
Tuesday, 04 December 2007 |
 This writeup is to get anyone interested in installing Subversion, a version control system, on a network quickly.
Read more...
|
|
|
Virtual Cogs Open Source Gaming Platform |
|
Tuesday, 17 July 2007 |
 An open source gaming platform, on the lines of the SONY PSP, is being developed by Virtual Cogs.Their VC21 series (powered by the popular Freescale Semiconductor 266MHz ARM926EJ-S™ i.MX21 processor) is based on the stackable VCMX212 single board computer , less than half the size of a business card.
Read more...
|
|
|
Programming the Surveyor SRV-1 with the LPC2000 flash utility |
|
Thursday, 05 April 2007 |
This writeup demonstrates using the LPC2000 Phillips ARM Flash utility to program the Surveyor SRV-1 robot from Surveyor Corporation.
Read more...
|
|
|
Compiling Camstream in Linux |
|
Friday, 16 March 2007 |
 Compiling Camstream in Linux. Camstream is a collection of tools for webcams and other video-devices, enhancing your Linux system with multimedia video.
It's written in C++ and with a nice GUI frontend in QT.
Read more
|
|
|
Serial Parser using a State Machine |
|
Tuesday, 27 February 2007 |
 This note illustrates how to decode or parse incoming serial data with an example.Useful code for GPS NMEA parsing.
Read more.. |
|
|
Wednesday, 13 September 2006 |
|
The main aim for this project was to create a board which could hold the maxstream Xbee modules.
The Xbee module headers have a 2mm spacing instead of the usual 2.54mm (.1 inch) header spacing.
I did have female receptacles for them, but they were a bit difficult to connect them to protoboards with
a 2.54mm spacing between pins.(Click here to see how I managed it before the PCBs were done) |
|
|
Thursday, 17 August 2006 |
A video preview of Protel DXP SITUS autorouting program.
The board consists of a PIC16f876a microcontroller,a Xbee radio from Maxstream and a Maxim level shifter.Click
Read more..
|
|
|
Wednesday, 05 July 2006 |
Stay tuned for the VS TANK hack powered by a PIC microcontroller and a XBEE radio module.
|
|
|
Burn Baby Burn :: Programming your Microcontroller! |
|
Monday, 30 May 2005 |
 There are usually alot of questions on the forum regarding how to program microcontrollers.
It was the same with me.I just coulnd't figure out how these guys "Burned!" a program onto
a chip,as easy as I burned discs.Read more..
|
|
|
ADXL202 Accelerometer soldering tutorial |
|
Sunday, 27 March 2005 |
 OK ,so i finally get my hands on Analog Devices' accelerometer- the ADXL202E.However i couldn't get many pages on how to solder the sensor in.So i decided to share my experience...Read more..
|
|
|
PIC 16F84A Temperature Controller |
|
Sunday, 05 December 2004 |
 Ever needed to measure temperature and display it?This project details measuring temperature using a temperature sensor ,an ADC and a Microcontroller PIC16f84a with schematics,codes and illustrations.
Read more..
|
|
|
Tuesday, 05 October 2004 |
 This project discusses the development of a machine, capable of finding it's way through a maze of rooms, searching for a fire and extinguishing it....   .
Read more..
|
|
|
Friday, 01 October 2004 |
 Describes basic robot building.Steering,mechanics,materials to be used.
Read more.. |
|
|
Friday, 01 October 2004 |
 One of the most used and easy to interface port with the PC-The parallel port.This tutorial is a followup of the First part.This part discusses the use of the port as an input...
Read more..
|
|
|
Friday, 01 October 2004 |
Need to control your machine/peripheral through the parallel port?This tutorial covers the basic interfacing techniques.A beginner level introduction to the all powerful and versatile Parallel Port. I have explained the most basic methods to program and control stuff like motors,LEDs using the parallel port. 
Read more..
|
|
|
Friday, 01 October 2004 |
 This site is all about robots .Yes robots,i've had a passion of creating machines since i was a kid.It's really inspiring and fulfilling when ..
Read more.. |
|
|
Thursday, 30 September 2004 |
Finally, after searching  , research  and alot of hard work  ,I finally get to have my own site  ,yes my own......
Read more.. |
|
|
scanner :: Line Following Robot |
|
Thursday, 30 September 2004 |
 This was my first line following robot.Since I didn't know much about microcontrollers , I used my computer's parallel port to run the machine.
Read more.. |
|
|
Thursday, 30 September 2004 |
 Iris is a simple line following robot., but much more modular than the first with card slots.
Read more..
|
|
|
Thursday, 30 September 2004 |
|
 Iris-e is the successor of Iris.The main aim of the machine was to search for golf ball holes along a track and place a ball in the hole on finding one.
Read more.. |
|
Articles
